Air Inlet, Model FC-1 Air Vent

Description
FC-1 air inlet produced by YUYUN SANHE adopts the design of mechanical exhaust and air supply in negative pressure, realizing the function that the dirty air in the room will quickly discharged out of the room and the fresh air out of the room enters the room after nature balance without opening the window. Then the indoor and outdoor air flow exchange is formed so it will ensure the indoor air quality. At present, this air inlet is mainly used in the large-scale chicken farm.

FC-1 air inlet is made by injection molding with high quality engineering plastic so they have large density and will be firmer.

Raw materials add anti-uv ingredients so they have strong anti-aging performance and longer service life; they have tight sealing, flexible opening and anti-bird mesh at air inlet; double spring ensure the ventilation windows are well sealed.

• The walls for small window installation should be at grade.
• The area within 15 cm around the small window should be solid wall (can install expansion bolt) and cannot be air brick.
• The inner side of the lower edge should be higher than the outside in order to avoid rainwater flowing backward.
• The embedded plank frame in advance should be on the same level with the inside wall of the chicken house.
• The reserved size of the hole: 560X270mm